Swiftech MCX462 V Manuale Utente Scaricare il pdf

Rouchon Industries, Inc., dba Swiftech – 1703 E. 28

Street, Signal Hill, CA 90755 – Tel. 562-595-8009 – Fax 562-595-8769

E Mail: Swiftech @swiftnets.com – URL: http://www.swiftnets.com

Page 1

Packing list

Parts Qty Parts Qty

Heat Sink 1 80mm fan straight brackets 4

Spring assembly – pre-installed 4 Snap-rivets (for fan installation) 4

92mm fan angled brackets– pre-installed 4 Thermal grease – Céramique 1

I. Heat sink Installation

1. The case should be laying flat on a table.

2. Lightly coat the CPU with the provided Céramique™ thermal compound. Detailed instructions can be found at

http://www.arcticsilver.com/ceramique_instructions.htm

3. The heatsink ships with 92mm fan brackets pre-installed. You will need to remove them, and install the

included 80mm brackets if you plan on using a 80mm fan. Use a thin screwdriver to remove and install the

brackets, so as to not damage the surrounding pins.

92mm fan angled bracket

80mm fan straight bracket

4. Place the MCX462-V heatsink over the CPU as shown in the schematic below. The large step side

MUST be located over the socket cam box. A label affixed to the base of the heatsink clearly identifies

which side this is.

- The retention clips should snap over each side, and hook onto the socket tabs. Make sure that the clips

are properly aligned to fit snuggly underneath the tabs.

- Gradually loosen (counterclockwise) each screw-spring assembly to release the spring tension,

checking that the clips remain engaged underneath the tabs.

- Continue backing off until the head of the screw completely clears the top of the bracket as shown

in the picture to the right ------------------------------------------------------------------------------------------------------Æ

- Double-check to ensure that the clips have remained underneath the tabs.

- Installation to the CPU is now complete

Screw head clears the

top of the bracket

AIRFLOW DIRECTION

Fan

Snap-rivet

Fan bracket

Bracket screw

Screw-spring assembly

MCX462-V heatsink

Socket 462

Cam box

Retention clip

Socket tabs

Information subject to change without notice

1 2

Sommario

Pagina 1

Pagina 2

5. Fan installation: 80mm and 92mm fans: use the provided snap-rivets as shown in the page 1 schematic. 5. Recommended fans Please consult our web si

Più documenti per Accessori per computer Swiftech MCX462 V

Per vedere il documento Swiftech MCX462 V Manuale Utente

Swiftech MCX462 V Manuale Utente (2 pagine)

Commenti su questo manuale

Nessun commento

Swiftech MCX462 V Manuale Utente

Navigare online o scaricare Manuale Utente per Accessori per computer Swiftech MCX462 V. Swiftech MCX462 V User Manual Manuale Utente

Sommario

Più documenti per Accessori per computer Swiftech MCX462 V

Commenti su questo manuale

Prodotti e manuali riguardandi Accessori per computer Swiftech MCX462 V